Articulated Part Control (CIGI Packets)
CIGI Class | CigiArtPartCtrlV3 | ||
|---|---|---|---|
CIGI Bass Class | CigiBaseArtPartCtrl | ||
Packet ID | 6 | ||
Packet Size (bytes) | 32 | ||
SpyClient Lookup | host2pcnova → h2ig.dat.mova_hv[x].val_artic (air targets) host2pcnova → h2ig.dat.movt_hv[x].val_artic (ground targets) host2pcnova → h2ig.dat.movs_hv[x].val_artic (sea targets) host2pcnova → h2ig.dat.sling_load_hv[x].val_artic (sling loads) host2pcnova → h2ig.dat.airfield_hv[x].val_artic (relocatable airfields) | ||
Parameter | Type | Description | Range |
Entity ID | unsigned int16 | This parameter specifies the entity to which the articulated part belongs. | 0 - MAXUINT16 |
Articulated Part ID | char | This parameter specifies the articulated part to which the data in this packed should be applied. When used with the Entity ID parameter, this parameter uniquely identifies a particular articulated part within the simulation. | 0 - 255 |
Articulated Part Enable | 1-bit field | This parameter determines whether the articulated part submodel should be enabled or disabled within the scene graph. If this parameter is set to Disable (0), the part is removed from the scene; if the parameter is set to Enable (1), the part is included in the scene. 0 = Disable 1 = Enable | 0 - 1 |
Roll (Articulation Value) | float | Values applied to articulation. | 0.0 - MAXFLOAT |